S2 7.9 Meter Class Association

Anyone know the approx. mast height above water?

Can someone help me with the apprx. bridge clearance for a 7.9?
Thanks!

I've polled my crew, and they are all for lowering the lifelines. All but one crew (6'5" tall) would be happy with 14". My one tall crew would prefer 18" so he can get his long legs out quicker when we tack. If there was a vote, I would vote to make it optional to lower the lifelines ...

We are in the Mid atlantic PHRF. Inboards are 171, and OB 168. We are allowed to raise our board, altough there has been requests to the commitee to have the board locked down ( sore losers?). So far we have prevailed in being able to raise the board.
Mike
SPEEDIE
456

Is a wieght cert. required for the NOODSs? We are planning to race in our very first 7.9 one design in Annapolis this spring. This will be probably be our only 7.9 one design race in 2006, and I neglected to consider that we may need a wieght certificate. Could someone please confirm that the weight...

I am expierencing a strange problem in tuning my mast. My port side inner stay is always much looser than the starboardd stay. When I bring the port stay up to the setting on the starboard stay, it takes the mast out of column. This is my 4th season with the boat, and I've never expierienced this be...

I took my fiddle block off, measured the sheaves, called scheafer marine and they sent me 2 new sheaves. What a difference it made in raising the keel!

I had an old fishfinder from an old boat I sold. I installed it on my s-2 with the transducer epoxied an inch or 2 away from the old transducer. Works great! Before I installed it, I tested the location by putting the transducer in a baggy full of water and held it in place with the fish finder turn...

I need to replace the fiddle block attached to the keel, and would appriciate any comments on what to replace it with.
Thanks!

last nite our keel line broke with the board about 1/2 way up and slamed into the down position. When I removed the cover I realized both the front & rear plastic slides had broken off. I found an old post on the repair process and will complete the repair soon. Are there any ramifications on co...

Can anyone help???? RE: 1985 with a Yanmar 1gm engine. I've been expeiencing a problem that is progessively getting worse. when I put it in forward gear my speed is very slow and it seems to take a long time before (it?) catches and she gets up to speed. Once at desired speed she maintains that spee...

Tom,
How high above the transom do you raise your mast support pole?
Thanks!