Bottom flossing

We request that you register on the site to post here. Replies to posts are open to all.

Moderators: sderby, Tim Bosma, Tom Elsen

Post Reply
Tom Cassidy 352
Posts: 34
Joined: Mon Mar 20, 2006 6:36 pm
Location: Sandusky, OH

Bottom flossing

Post by Tom Cassidy 352 »

I'd like to make a bottom flosser and would appreciate anyone's plan if you've made one. Thanks, Tom Cassidy email-ann1303@sbcglobal.net
sawalt
Posts: 39
Joined: Tue Apr 22, 2003 2:23 pm
Location: Puyallup, Wa

Re: Bottom flossing

Post by sawalt »

I bought one a couple years ago from Chris Winnard, the local North Sails Rep. He works for Ullman now. I could take a picture of mine and post some dimensions.
Scott Awalt
Sugar Magnolia
#253
Tom Cassidy 352
Posts: 34
Joined: Mon Mar 20, 2006 6:36 pm
Location: Sandusky, OH

Re: Bottom flossing

Post by Tom Cassidy 352 »

Puyallup, WA, man that brings back great memories of the Roadhouse. Is the food still great? If you could send along the demensions, pics that would be great. What does it have that sinks it so it's easier to get under the boat? Thanks, TomCassidy
email-ann1303@sbcglobal.net
sawalt
Posts: 39
Joined: Tue Apr 22, 2003 2:23 pm
Location: Puyallup, Wa

Re: Bottom flossing

Post by sawalt »

I believe the Roadhouse burned down a couple years ago :( will take picks of flosser this weekend.
Scott Awalt
Sugar Magnolia
#253
Tom Cassidy 352
Posts: 34
Joined: Mon Mar 20, 2006 6:36 pm
Location: Sandusky, OH

Re: Bottom flossing

Post by Tom Cassidy 352 »

Sorry to hear about the Roadhouse. Pics and demensions would be much appreciated. Tom
User avatar
Tim Bosma
Web Lackey
Posts: 530
Joined: Tue Jan 14, 2003 4:56 pm
Location: West Michigan
Contact:

Re: Bottom flossing

Post by Tim Bosma »

Our flosser:
We bought a 1 foot wide piece of green outdoor carpet - it comes in 12' length. Then we cut an old broom handle into 2 15" pieces, rolled the pieces into the ends and stapled the carpet to the handles. We then drilled holes in each end of the handles and added about 1 1/2 fathoms of some clothesline to each handle.

We were able to pay for this by having someone else bring the beer one week!
Tim Bosma, Bosun
Hot Tamale Racing
boz@htr477.com
S2 7.9's : #477
sawalt
Posts: 39
Joined: Tue Apr 22, 2003 2:23 pm
Location: Puyallup, Wa

Re: Bottom flossing

Post by sawalt »

here are the photos of my Flosser
Attachments
IMG_0003a.JPG
IMG_0003a.JPG (152.66 KiB) Viewed 9222 times
IMG_0001a.JPG
IMG_0001a.JPG (90.37 KiB) Viewed 9225 times
Scott Awalt
Sugar Magnolia
#253
sawalt
Posts: 39
Joined: Tue Apr 22, 2003 2:23 pm
Location: Puyallup, Wa

Re: Bottom flossing

Post by sawalt »

2 more
Attachments
IMG_0005a.JPG
IMG_0005a.JPG (153.22 KiB) Viewed 9211 times
IMG_0004a.JPG
IMG_0004a.JPG (160.72 KiB) Viewed 9209 times
Scott Awalt
Sugar Magnolia
#253
sawalt
Posts: 39
Joined: Tue Apr 22, 2003 2:23 pm
Location: Puyallup, Wa

Re: Bottom flossing

Post by sawalt »

1 more
Attachments
IMG_0006a.JPG
IMG_0006a.JPG (168.38 KiB) Viewed 9203 times
Scott Awalt
Sugar Magnolia
#253
Tom Cassidy 352
Posts: 34
Joined: Mon Mar 20, 2006 6:36 pm
Location: Sandusky, OH

Re: Bottom flossing

Post by Tom Cassidy 352 »

Thanks guys. Appreciate the help and the pics. Unfortunately, this eliminates one more reason I was using for not doing better on Wed nights. Tom
dave
Posts: 727
Joined: Fri Jan 02, 2004 10:39 pm
Location: Little Rock

Re: Bottom flossing

Post by dave »

Flossing is certainly better than nothing, but the blades REALLY need to be clean and smooth. Some folks scrub the rudder off with a brush or whatever but if you have something less than hard bottom paint, that leaves gouges and scratches going 90 degrees to the water flow! :oops: This all still leaves a bad keel.............................................
Tom Cassidy 352
Posts: 34
Joined: Mon Mar 20, 2006 6:36 pm
Location: Sandusky, OH

Re: Bottom flossing

Post by Tom Cassidy 352 »

Dave, you're right and that's why I raise and pin the board everytime I come in. Then I clean the rudder with a terrycloth towel wrapped around a scrub brush on a long handle. Always appreciate the input. Thanks, Tom
Post Reply