Pulling on the upper shroud I noticed that the whole spreader was moving fore and aft. Is the solution to snug the bolt, or is this indicative of some larger problem?
Thanks,
George
Dolcetto # 286
Spreader movement
Moderators: sderby, Tim Bosma, Tom Elsen
-
grandillusion
- Posts: 172
- Joined: Tue Oct 31, 2006 12:42 am
- Location: South Havenish
Re: Spreader movement
check the spreader bracker welds, failure is common
S2 7.9 216, H 16 80127, Star 6188