Have stock again on bushings. Made from virgin Delrin. Made to original S2 specifications. I have had my set on for almost twenty years and they are still like new.
Set of two costs $38 delivered to your door.
Email me at sales@steermachine.com to get your set now.
S2 7.9 Rudder Gudgeon Bushings
Moderators: Tim Bosma, Tom Elsen
S2 7.9 Rudder Gudgeon Bushings
Stef
Odyssey #146
Odyssey #146
- SailingUphill
- Posts: 206
- Joined: Fri Aug 17, 2012 1:52 pm
Re: S2 7.9 Rudder Gudgeon Bushings
Stef just sent me a set! They fit perfect, and took the rudder slop right out. Bargain! We also discussed the kick up rudder and I think Stef's solution makes a lot of sense. Simply, my hull (399) the kick up rudder moves ever so slightly into the stopper pin, maybe 1/8 to 1/4 inch. That translates into a tremendous amount of movement at the bottom of the rudder, enough to give noticeable weather helm. Anyway, I shimmed mine, but Stef put a flat stainless piece on top of the rudder (screwed in) to fill the gap. When I get a moment I'm going to do the same.
I figured 5 years, good to hear they last as long as you say. I have one unused one as a spare, just in case.
Never ceases to amaze me the stuff the owners have figured out on these boats.
I figured 5 years, good to hear they last as long as you say. I have one unused one as a spare, just in case.
Never ceases to amaze me the stuff the owners have figured out on these boats.
Presently hull 399, "Ragtime" Blackwater Yacht Racing, Smith Mountain Lake, VA
Fomerly hull 68,"Rum Line," Paupack Sail Club, Lake Wallenpaupack, PA.
Fomerly hull 68,"Rum Line," Paupack Sail Club, Lake Wallenpaupack, PA.